New Geyser Installation
Mounting and connecting a newly purchased storage geyser in a bathroom that has the right pipe and power points ready.
- New homes
- Renovated bathrooms
New, replacement & relocated geysers
Geyser Installation in Gurgaon
Bought a new geyser, replacing an old one or shifting it to another bathroom? Our local team checks the wall, pipes and electrical point, mounts the unit securely and tests it for leaks and heating before handing it over.
- Wall & location checked
- Safety valve fitted correctly
- Electrical point reviewed
- Leak & heating test
- Site check firstWall, pipes and power
- Proper connectionsInlet, outlet & safety valve
- Safety-mindedElectrical point reviewed
- Tested on handoverNo leaks, heating works
What we install
Geyser Installation for Every Situation
Whether it's a brand-new bathroom in a builder floor or a quick swap of a 12-year-old unit, installation needs the same care.
Old Geyser Replacement
Safely draining and removing your existing geyser, checking the old fittings, and installing the new unit in its place.
- Leaking tanks
- Upgrades
Geyser Relocation
Shifting a geyser to a new wall or a different bathroom, including a check of whether the new spot has suitable pipe and power access.
- Remodelling
- Moving house
Instant Geyser Installation
Fitting compact instant water heaters, often used above kitchen sinks or in small bathrooms, where the electrical point needs to suit the model's power rating.
- Kitchens
- Guest bathrooms
Uninstall & Reinstall
Taking a geyser down during tiling or bathroom work and putting it back up safely afterwards, with connections re-checked for leaks.
- Bathroom tiling
- Wall repairs
Before you book
Is Your Home Ready for Geyser Installation?
Tick what you already have in place. It takes a minute and helps the installation visit go smoothly.
Installation readiness checklist
Nothing here is required before you call. Anything unticked can be discussed with us.
Done the right way
What a Proper Geyser Installation Looks Like
A geyser that looks fine on the wall can still be installed poorly. These are the details our installers pay attention to, because they decide whether a geyser runs safely for years or starts leaking in months.
- ASecure wall mountingSuitable anchors on a solid wall, with the unit level.
- BCold-water inlet with valveA shut-off valve so water can be isolated for service.
- CSafety / pressure valveFitted on the inlet to protect the tank from excess pressure.
- DHot-water outletLeak-free connection to the shower and basin line.
- ESuitable electrical pointRated for the geyser, earthed, and away from water spray.
- FSpace for future serviceEnough clearance to reach valves and open the cover later.
Choosing the spot
Where Should Your Geyser Be Installed?
In most Gurgaon apartments the geyser position is decided when the bathroom is built. If you do have a choice, a few simple principles make a big difference to safety, convenience and future servicing.
- On a strong wallA full storage geyser is heavy. Solid brick or concrete is far safer than a thin partition.
- Out of direct water sprayKeep the unit and its electrical point away from where the shower splashes.
- Close to where hot water is usedA shorter pipe run to the shower means less waiting for hot water to arrive.
- Reachable for servicingLeave room to access the valves and open the cover without removing the geyser.
Always follow the geyser manufacturer's installation instructions for your specific model.
Know your geyser
Storage vs Instant Geyser: Installation Differences
The type of geyser you've bought changes what the installation needs.
Storage Geyser
Heats and holds a tank of water
- Typical location
- Main bathrooms, mounted high on the wall
- Wall needs
- Strong mounting for the weight of a full tank
- Plumbing
- Cold inlet, hot outlet and a safety / pressure valve
- Best for
- Showers and multiple taps needing hot water together
Instant Geyser
Heats water as it flows
- Typical location
- Kitchens and small or guest bathrooms
- Wall needs
- Lighter unit, but still needs secure mounting
- Electrical
- Often a higher power draw while running, so the point must suit the model's rating
- Best for
- Quick hot water at a single tap or basin
Check your geyser's rating plate or manual for its capacity and power rating, and share it when you call.
Installation process
How Your Geyser Gets Installed
Five clear stages, from your call to a working geyser.
-
Share Details
Call 088821 80989 with the geyser type, capacity and location.
-
Site Check
The wall, pipe points and electrical point are checked at your home.
-
Mount & Connect
The geyser is mounted securely and the inlet, outlet and valves are connected.
-
Fill & Power
The tank is filled with water first, then the electrical connection is made.
-
Test & Handover
Checked for leaks and heating, with simple usage tips for you.
Replacing an old geyser
Swapping Your Old Geyser for a New One
Replacement is more than removing one unit and hanging another. Here's what happens at each end.
Removing the old geyser
- Power is switched off and the water supply isolated
- The tank is drained so it can be handled safely
- Pipes and wiring are disconnected and the unit taken down
- Old fittings and wall anchors are checked for reuse or replacement
Installing the new geyser
- The new unit is mounted, reusing sound anchors or fitting new ones
- Worn connectors and washers are replaced rather than reused
- The safety valve is fitted and the tank filled before power-on
- Leak and heating tests are done before handover
Not sure whether your old geyser needs replacing? Our geyser repair service can check whether a repair makes more sense first.
Avoid future problems
Common Geyser Installation Mistakes We Avoid
Many geyser repairs we're called for trace back to how the unit was installed in the first place.
We avoid this
Skipping the safety valve
Without a working pressure valve, the tank has no protection against pressure build-up.
Safety valve fitted on the inlet side.
We avoid this
Weak wall fixing
Light anchors or a thin wall can let a full, heavy geyser pull loose over time.
Wall checked and suitable anchors used.
We avoid this
Reusing worn connectors
Old washers and flexible pipes are a leading cause of drips soon after installation.
Worn parts replaced, joints leak-tested.
We avoid this
Powering an empty tank
Switching on before the tank is full can damage the heating element almost immediately.
Tank filled and air released before power-on.
We avoid this
Extension boards & wet sockets
Running a geyser from a multi-plug, or a socket in the splash zone, is a real electrical risk.
Electrical point reviewed for suitability.
We avoid this
No room for servicing
Geysers boxed into tight corners have to be taken down just to change a thermostat.
Clearance left to reach valves and cover.
After installation
Looking After Your Newly Installed Geyser
A few habits in the first weeks help your new geyser work well for longer.
Never run it empty
If the water supply is ever shut off or the tank drained, refill it fully before switching the geyser back on.
Use a moderate setting
A moderate temperature is safer for daily use and puts less strain on the element and thermostat.
Watch the joints early on
Glance at the connections for drips during the first few days, and call us if you notice any.
Keep the paperwork
Store the manual and the manufacturer's warranty card and bill somewhere easy to find.
Brands we fit
Geyser Brands We Install in Gurgaon Homes
Whichever brand you have bought, a safe installation rests on the same fundamentals: a wall that can carry a full tank, correct inlet and outlet connections, a working safety valve and a suitable electrical point. Om Geyser Repair & Service installs the brands found in most Gurgaon apartments, builder floors and independent houses.
RacoldStorage & instant
AO SmithStorage geysers
BajajStorage & instant
HavellsStorage geysers
V-GuardStorage & instant
CromptonStorage geysers
VenusStorage geysers
Other brandsTell us your model
All brand names belong to their respective owners. Om Geyser Repair & Service is an independent local service provider and is not an authorised installer or service centre for any manufacturer. Keep your bill and warranty card safe, and check whether your brand requires its own technician for the first installation.
Geyser Installation Near You in Gurgaon
From our shop in Kanhai Gaon Market, Sector 45, we install geysers in homes in and around Gurgaon, from apartments and builder floors to independent houses.
- Sector 45
- Sector 46
- Sector 47
- Sector 49
- Sector 50
- Sector 51
- Sushant Lok
- South City
- Sohna Road
- Golf Course Road
We serve customers in and around Gurgaon. Contact us to confirm service availability at your location.
FAQ
Geyser Installation Questions
What Gurgaon homeowners usually ask before booking a geyser installation.
Yes. Om Geyser Repair & Service installs geysers at customers' homes in and around Gurgaon from our shop in Sector 45. Call 088821 80989 with your geyser type and location to discuss the installation and confirm availability.
Yes. Replacement involves switching off power, isolating and draining the old geyser, removing it, checking the existing fittings, and then installing and testing the new unit. Worn connectors are replaced rather than reused.
A storage geyser should have a working safety or pressure-relief valve on the inlet side. It protects the tank by releasing excess pressure. Many geysers include one in the box, and the manufacturer's manual explains how it should be fitted.
Ideally, have the geyser and its manual at home, a chosen location, hot and cold pipe points nearby, a suitable electrical point, a solid wall and a clear working area. If anything is missing, mention it when you call so it can be discussed.
Not always. A storage geyser needs a strong wall, such as brick or concrete, to carry its weight when full. It should also be near the pipe and electrical points, out of direct shower spray, and accessible for future servicing.
An electric heating element is designed to sit in water. Powering it while the tank is empty or partly filled can overheat and damage the element very quickly. The tank should be completely filled before the geyser is switched on.
We install the common household brands found in Gurgaon homes, including Racold, AO Smith, Bajaj, Havells, V-Guard, Crompton and Venus, along with other electric storage and instant water heaters. We are an independent service provider, not an authorised installer for any manufacturer, so if your geyser is brand new it is worth checking whether the warranty requires the brand's own technician.
The cost depends on the geyser type, whether an old unit needs removing, the condition of the existing pipe and electrical points, and any fittings required. Call 088821 80989 to share your requirement, and the installation work will be discussed with you before it begins.
Book installation
Request a Geyser Installation Visit
Send your details and we'll get back to you. If you need it fitted today, calling is quickest.
Tell Us About Your Geyser
Share the brand, capacity, where it will be fitted and whether an old unit needs removing.
Prefer to talk right away? Call 088821 80989. We're open 24 hours, Monday to Sunday.
Om Geyser Repair & ServiceOpen 24 Hours
- Phone088821 80989
- AddressShop No. 9, Kanhai Gaon Market, Sector 45, Gurugram, Haryana 122003
- HoursOpen 24 Hours, Monday to Sunday
Related services
Other Geyser Services You May Need
Ready to Install Your Geyser?
Tell us the geyser type and where it's going. Om Geyser Repair & Service will discuss the installation and arrange a visit in Gurugram.
